Infant Optics DXR-8 PRO Camera Setup, Troubleshooting, Review

The Infant Optics DXR-8 PRO was recently launched into the market and It has made a good reputation in the market in a very short time. It is an ingenious wireless baby monitor camera, that is at present most in use due to its cutting edge technology. This is a pocket-friendly baby monitor camera that is not too highly spendthrift. You can easily buy this wireless camera from any promotion platform like Amazon, Walmart, eBay, and other selling platforms. The working of this camera is very good. This works very smartly because it comes with the technology that consists of digital technology but does not work on the behalf of internet connection.

The infant optics video baby monitor dxr-8 pro is the most advanced wireless security surveillance camera. This takes the 2.4GHz FHSS frequency in a bankrupt-loop system. You can effortlessly see and hear your baby sound via 720P 5″ HD Display that comes with A.N.R. (Active Noise Reduction). The Next-generation baby monitor wireless security monitor camera. In addition, another peculiarity of this baby monitor camera is an assortment of 1000mW speakers masterminded merely for this DXR-8 PRO for full volume and brusque audio quality. To use this wireless security baby monitor camera impeccably, you can emulate the instructions here.

Steps for the Infant optics dxr-8 pro add-on camera (not compatible with dxr-8) white Installation

The below-mentioned steps are presented to provide you information regarding “How to install or use the Infant Optics DXR-8 PRO Camera?”. Let’s know about it.

Firstly, inbox the packaging box, if this Infant Optics pro-baby monitor camera is new.
The infant optics (dxr-8 pro) accessories are:
(i) camera power adapter (5.9V DC/1000mA), (ii) Camera unit (with Aluminium Lens Hood), (iii) Optical Zoom Lens, (iv) Screw and Anchor, (v) Monitor unit with rechargeable Lithium-Ion battery (vi) Monitor power adapter (5V DC/1500mA) (vii) USB power adapter,
(viii) Infant optics pro dxr-8 manual, etc.
Let’s take all the present accessories from its packaging box and begin to install the baby monitor camera by following the on-screen instructions.
Now, plug in the wireless baby monitor camera using the power adapter.
Also, push the power button of the monitor and turn it on. On this monitor, fix some buttons that are fixed to navigate the devices easily.
Now, you have to pair this camera with the monitor and use it.

Pair the Infant Optics DXR-8 PRO Camera with the monitor

The below-mentioned steps are to know “How to pair the Infant Optics Pro DXR-8 wireless baby monitor camera with the monitor?”. Here are the steps.

First of all, connect the camera unit with the electrical power, it is a pre-registered wireless security camera.
There is no need to register this wireless camera.
Now, you can also turn on the power of the monitor and wait for a few seconds.
The home screen of the monitor unit is presented in front of you earlier.
Now, you should tap on the monitor unit and directly move on to the “Home Menu” option.
After this, select the camera control option, then click on the add camera, and after this click on the camera 1-4. Then, click on the “Ok” option.
The pairing mode starts while you also press & hold the pair button from below of this camera unit.
It is pairing now, so wait for a few seconds. Now, this is paired successfully, fit this camera in a proper zone where you have to locate your baby impeccably.
So, fit this camera and watch the live videos on this monitor with night mode, zoom quality, etc. extra added features.

Steps for the Infant Optics DXR-8 PRO Camera Setup

Here are some specific points that are mentioned below to modify the settings of the wireless baby monitor camera smoothly. Let’s use these points.

Change the brightness of the monitor using the home menu option.
Also, modify the settings by going into the “SHORT-CUT” option.
Adjust the volume and apply the other mode using its monitor.
Just, navigate the on-screen directions and modify the settings of this camera.

How to pair infant optics pro dxr-8 baby monitors with a camera?

If you want to pair this wireless security baby monitor camera, then let’s emulate the below steps and air it.

First of all, go under the home menu.
Now, designate the control pane and add the extra add on-camera with this monitor.
After pairing the device, it shows the message regarding the confirmation for the successful pairing process.
Just use the infant optics pro (dxr-8) wall mount camera and fix it using the drilling method and monitor your baby from anywhere in your home using the camera.

How to do the infant optics dxr-8 pro-split-screen mode?

Follow the below-given steps to know how to split the Pro-DXR-8 screen.

Fundamentally, you have to only see or watch the live videos via this monitor with only a camera.
If you want to attach this monitor for the camera and want to use the split mode, then you are not able to use it on this monitor.
Because this only allows one camera and in this monitor also not available this kind of split-screen mode.

Infant optics digital video monitor dxr-8 pro sleep mode

Following are the steps to enable the infant optics dxr-8 sleep mode.

First of all, switch off the power of the LCD screen of the infant optics wireless baby monitor camera by using the power on/off/sleep mode button. You have to do it while the audio is on.
It conserves the power, simply push the power On/Off/Sleep mode option to switch on the power again.
The sleep mode is enabled now, you can now use this monitor with a sleep mode.

Following are the steps to enable the Infant Optics Pro DXR-8 talk mode

To use the talk mode on this wireless baby monitor camera then simply click on your monitor unit take button. This mode fundamentally helps you to talk with your baby from this device using the unit’s loudspeakers. Now, the mic option will automatically show up on your screen while this mode is enabled on your monitor screen.

Steps to use the Infant optics DXR-8 Night vision mode

This wireless security camera intending with the 8 high-intensity infrared LEDs signal lights. This is intended to show you a clear image or videos in the night with a clear view. If the photosensor shows the low signal light, then it automatically moves or activates into the black and white ambient light.

How much is the infant optics pro dxr-8 battery life?

If you are using the standby mode it simultaneously works for 10 hours including watching 6.5 hours continuously on the screen. The rechargeable Li-ion battery life of the Infant Optics is up to 11.5 hours.

How much is the area covered under the infant optics dxr-8 pro range?

This wireless security camera selling by the Genexus Distributions with white colour and a 5inches screen size monitor. This covers the range up to 300.0 meters.

Steps for the Infant Optics DXR-8 PRO Camera Troubleshooting

Here in the below, there are some specified steps to fix all wireless camera issues. Let’s solve these camera issues by using these steps.

(i) Infant optics pro dxr-8 pair fail

In this case, you are simply again holding the power button of this wireless camera just for two to three seconds and using it again. Surely, after this, it is working well. You may confirm its working status from its LED signal light. If this is showing up in the light that means it is working.

(ii) Infant optics pro dxr-8 won’t turn on

You have to solve that occurring issue by resetting the factory default settings of this wireless monitor camera. Just, hold the reset button which is located on the camera, so hold it and reset this device. Also, hold the power button of the monitor just for a minute to reset both devices precisely. Ensure that it is fitly reset and working well.

(iii) Infant optics pro dxr-8 red light won’t turn on

If the infant optics pro-dxr-8 monitors the red light, then you will simply turn on the power of this device. After that, kindly switch on its power and verify the signal light again.

(iv) Infant optics out of signal coverage pro dxr-8

To the Infant Optics troubleshooting, just keep this wireless monitor unit under the coverage of this wireless camera. If you use this camera out of the coverage signal range, then surely this issue occurs.

Infant Optics DXR-8 PRO Camera Review

The infant optics pro dxr-8 monitor only works with this Infant wireless camera. If you locate a home surveillance camera for monitoring your then you are using the infant optics pro dxr-8. This is the most advanced wireless camera. The Infant optics replacement monitor is effortlessly available on the selling platforms. It also arrives with the infant optics free second camera and reads all the infant optics add-on camera instructions from its user manual to operate this camera very smoothly. The working and operational activities are entirely dependent on the digital monitor connection. Apart from this, to protect it from the hacked systems, you are not able to connect the infant optics pro-dxr-8 system with the phone.

Infant Optics Pro DXR-8 manual

Following are the describing queries answers are exclusively included under the Infant Optics Pro DXR-8 user manual. These are some queries that answer are included in the manual.

Does infant optics pro DXR-8 have an app?
How to use the infant optics pro-baby monitor camera?
Is the infant optics dxr-8 video baby monitor camera the best?
What does the infant optics light colours mean?
What should I do if the infant optics night vision is not working?
How to use the infant optics alarm ring alert?
Can I use the infant optics temperature alarm?
What’s the reason for the infant optics red light when charging?
How do you know about the infant optics baby monitor temperature accuracy?
How do the infant optics monitor the temperature setting?